4D Illuminated Light Up Car Emblem Tail Lights For Audi

Light Up Audi Badge Light Feature:

【Fit for Audi】The appearance of this product is the same as the original car standard, installed in the trunk of the car can be directly replaced by the original car standard. Its special vacuum plating technology ensures not only the same gloss as the original logo, but also high transparency and uniform brightness.

【High Quality】Adopting high quality LED light set, high brightness and long service life. Special waterproof and dustproof design to ensure long-term use.

【Unique design】This product is designed for car modification enthusiasts. When the lights are not lit during the day, there is no difference with the original car mark. When the license plate lighting is on at night, the LED lights will also light up, making the marker dazzling at night, rich in future technology and highlighting the noble bloodline of your car.

【Easy to install】Using high-quality double-sided adhesive for cars, strong and durable! Built-in LED lights, especially waterproof and dustproof! The life of LED lights up to 100,000 hours.

Note: pro, this product is suitable for all Audi cars.

Light Up Audi Badge Light Feature:

Voltage:12 (V)
Size: 7.09*2.28inch
Wiring length: 0.6 meters
Material: ABS plating, 3M glue at the bottom
Package Contents:1* Light Up Audi Badge Light

Light Up Audi Badge Installation Steps:

Please prepare the following tools before you start: 1. flat head screwdriver,2. Phillips screwdriver,3. Insulation tape,4. towel,5. pliers

1. First, place the towel next to the tail door sign and shake the sign with a flat screwdriver to prevent the towel from scratching the body.

2. Take off the double-sided adhesive tape first. Squatting should be moderate, not too fierce.

Later, slowly squat down to clean the sticker and the double-sided adhesive.

3. Remove the partition board inside the trunk using a Phillips screwdriver. Note that there are clips in some places. Pay attention to remove the baffle, see the various lines.

4. Now install the label light, and the power cord of the label light passes through one of the label positioning holes.
And put on the back of the label light in the trunk of the car. While pulling the wire, glue the label light to the body and press it tightly.

5. The beacon light has been installed and is now connected to the power supply. The lights should be connected to the power supply of the license plate, so that when the night light is on, the lights will be on at the same time, and find the power connector of the rear license plate light.

Not Enough for your car decor? Check this Audi Car Door Lights: https://www.carledlogo.co.uk/car-door-lights/ghost-shadow-lights/audi-puddle-lights/

Notes：
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.